Mounting the TV on eight types of walls is especially essential when tasked with installing a television.
Unexpected challenges are a fact by wall mounting a TV on any surface.
Gaining insights into the types of walls is the best way to mount a TV safely
Drywall walls also use the name sheetrock, wallboard, plasterboard, LAGYP, and gypsum board
By hard-pressing gypsum plaster between two thick sheets of paper to make one drywall.
Making interior walls and ceilings is its primary purpose.
One can purchase this product under the trademarks Sheetrock in the United States.
On these types of walls mounting a TV is somewhat more comfortable than some other types of surfaces.
Because the requirement to ultimately mount a television on the drywall walls is finding the stud inside the wall.
Brick walls consist of kneaded clay-bearing soil, lime, sand, concrete material, or a combination of all of them.
Frequently fire hardened or air dried, utilized in brickwork construction.
Installing a television on a brick wall requires the use of brick or concrete anchors
So a professional TV installer should be the one installing on this type of material.
Concrete walls are manufactured from a combination of pulverized stone, sand, cement, and water that solidifies to a stone-like mass.
To mount a television on a concrete wall is always recommended to the installers with the best experience.
It may require a powerful cordless drill, plastic or metal anchor for the bolts, and a physically strong person to drill the holes.
Since reinforced concrete is mostly used in homes and is challenging leveling the TV without drilling additional holes for adjustments.
It is frequently crafted from different materials varying from granite, sandstone, marble, slate, tile, travertine to limestone, or flint.
TV mounting on stone walls may require diamond drill bits and extra anchors for the bolts that will hold the wall plate against the wall.
It is especially recommended that only a professional installation company like Multimedia Tech with over ten years of experience gets a project of this type done.
Since these types of walls to tend to crack if the wrong technique is used when drilling holes.
Wood walls are a structure that is positioned on the edges of foundations or platforms and must be supported by two pillars, if possible.
This type of wall is pretty much the easiest to use to mount a TV since no matter the position pretty much every surface on the wall is a fair game.
Siding walls come in synthetic options such as cement board, aluminum, and vinyl.
This kind of wall protects against the elements and for decorative purposes.
A TV installation on this kind of wall can be challenging since even the most advanced stud finders in the market have difficulties providing accurate location of the studs inside the wall.
And remember to waterproof all the exterior siding with silicone after drilling.
Interior walls are built with framing that is 2 inches by 4 inches or 2 inches by 6-inch wall studs.
Panels of drywall are screwing or nailing to the framing panels of drywall.
Please note that In most cases, interior walls do not have any insulation inside them.
These make installing wiring for the tv installation project less complicated and readings provided by a stud finder more accurate.
And readings provided by a stud finder a lot more accurate.
An exterior wall is an external wall or vertical enclosure of a construction.
This type of wall structure provides mostly a decorative finish and waterproofing capabilities.
These make the installation of low voltage cables more complicated for a television install and makes virtually impossible getting the accurate location of the wooden stud by the stud finder.
Achieving a total understanding of all the kinds of walls that can be used to mount a television is an essential step.
However, keep in mind that this is only one piece of the puzzle.
Mastering additional steps to complete a project of this kind, there are necessary.